Slim Oval Acrylic Flush Ceiling Light

A long, slim oval panel that sits tight against the ceiling, standing just 4 cm (1.6") proud of the plaster. The acrylic diffuser spreads an even wash of light straight down across the full length of the fitting, with no bright spots or hard shadow lines. The frame comes in Black or White, and three lengths are offered so you can match it to a corridor, a landing or a small room. It is hardwired to the ceiling, so there is no flex or plug to hide.

Key Features

• Light along a run, not a single pool: The elongated oval lights a corridor or the front of a wardrobe run end to end, rather than dropping one bright circle in the middle.
• Only 4 cm (1.6") deep: With a 4 cm (1.6") profile it suits low ceilings, loft landings and doorways where a hanging fitting would be in the way of a door or a head.
• Built-in LED behind acrylic: The light comes from an SMD LED board fixed inside the housing, diffused through the acrylic face for a soft, glare-free spread.
• Hardwired, flush mounting: It fixes directly to the ceiling on its plate and wires into the existing supply - assembly is straightforward and nothing hangs below the housing.
• Two finishes, three lengths: Choose Black for a defined outline against white plaster, or White to let the fitting disappear into the ceiling; pick the length to suit the space.
• Rated IP20: An indoor rating, suited to dry rooms such as hallways, bedrooms and offices.

Specification

• Bulb fitting: Integrated LED
• Light points: 1
• Maximum wattage: 59 W per bulb
• Bulbs included: Yes
• Protection rating: IP20
• Mounting: hardwired ceiling plate
• Finish: Black or White
• Material: metal frame with an acrylic diffuser

Available sizes

• 40 cm (15.7")
• 60 cm (23.6")
• 80 cm (31.5")

Best over a hallway or landing where you want continuous light along the walking line, and equally at home on a bedroom ceiling above a run of wardrobes. Its shallow depth makes it a sensible answer wherever ceiling height is tight.