Slim Disc Tilting LED Semi-Flush Ceiling Light

A shallow lacquered disc on a short stem, sitting close to the ceiling with just a few centimetres of clearance. The whole underside is an acrylic diffuser, so the light comes out soft and even rather than as a bright point, and it washes downwards across the room. The disc tilts left and right on its stem, which lets you angle the light and also means it can go on a sloped ceiling up to 30 degrees. Choose Beige or Green for the rim; both come with a contrasting brown ceiling plate.

Key Features

• Even, glare-free light: The full-width acrylic diffuser spreads the output across the whole face of the disc. Useful in a bedroom, where a bare bulb overhead is the thing you notice from the pillow.
• Dimmable by remote: Remote control dimming is built in, so you can drop the level for evenings without wiring a dimmer switch into the wall.
• Tilts to aim the light: The head swings left and right on its stem. Height is fixed, but the angle is yours, and the fitting is rated for sloped ceilings up to 30 degrees.
• Built-in LED: An SMD LED board is fitted inside the disc rather than a screw-in lamp, and it draws up to 36W. It arrives ready to light.
• Three diameters: At 9 cm (3.5") tall it stays out of the way in low rooms; pick 30, 40 or 50 cm (19.7") across to suit how much floor the room has.

Specification

• Bulb fitting: Integrated LED
• Light points: 1
• Maximum wattage: 36 W per bulb
• Bulbs included: Yes
• Dimmable: Yes
• Protection rating: IP20
• Switch: no switch
• Mounting: hardwired ceiling plate with a short stem
• Finish: Beige or Green, with a brown ceiling plate
• Material: metal fixture with an acrylic shade

Available sizes

• D30 cm (11.8")
• D40 cm (15.7")
• D50 cm (19.7")

Best over a bed or in a hallway where a hanging pendant would sit too low, and comfortable in a room of roughly 10 to 15 square metres. It is hardwired to a ceiling point and rated IP20, so keep it to dry indoor rooms.