Ornate Resin and Glass Flush Ceiling Light

A round flush ceiling light with a moulded resin rim and a frosted glass dome beneath it. The glass diffuses the light evenly, so the room gets a soft, general wash rather than a bright hotspot, with a little extra glow escaping through the marbled panels around the edge. It sits tight against the ceiling, which makes it a sensible choice where a pendant would hang in the way. Three sizes are offered, from 36 cm (14.2") to 49 cm (19.3") across.

Key Features

• Diffused, even light: The opal glass dome spreads light downwards and outwards across the whole room, keeping shadows soft and glare low.
• Three light colours: The colour temperature is switched at your wall switch, so you can move between warmer and cooler light without any extra controls. The fitting does not dim.
• Decorative moulded rim: A resin border in an antique brass finish, beaded and picked out with leaf motifs, with marbled panels set between the scrolls.
• Built-in LED source: The light comes from an SMD LED board fixed inside the fitting and included as supplied, so nothing screws in or out.
• Flush to the ceiling: Wired in at a ceiling plate with no drop at all, useful in rooms with lower ceilings, on landings or above a bed.
• Sized for average rooms: The maker suggests it for spaces of roughly 15 to 20 m²; pick the diameter to suit the ceiling it lands on.

Specification

• Bulb fitting: Integrated LED
• Light points: 1
• Bulbs included: Yes
• Dimmable: No
• Protection rating: IP20
• Switch: three light colours changed by the wall switch
• Mounting: hardwired ceiling plate
• Finish: antique brass
• Material: resin frame with glass shade

Dimensions

• Diameter: 36 cm (14.2")

Best over the centre of a living room or bedroom, where it gives the whole room its base layer of light without hanging into head height. In a bedroom it also works well as the main light above the bed.