Brushed Metal Ring LED Ceiling Pendant

A set of brushed metal rings hung at staggered heights from a single ceiling plate, each ring lit along its lower edge by an acrylic diffuser. The light spreads evenly downwards and outwards with no glare from a bare bulb, which is why it works so well over a seating area or a long table. Built from metal and acrylic, with LED as the light source and an IP20 rating for indoor use. Choose from two to five rings in diameters from 20 to 80 cm (31.5"), in a black, gold or coffee frame.

Key Features

• Layered rings, one fixing point: Every ring hangs from the same round ceiling plate, so a sculptural multi-tier fitting needs only one outlet in the ceiling.
• Set the drop yourself: The suspension cables are adjustable, so you can space the rings closer together over a dining table or stretch them down a tall stairwell-height void.
• Glare-free downward light: The acrylic strip runs around the underside of each ring, softening the LED into a continuous line rather than a row of bright points.
• Slim profile: The frame measures 25 mm deep with a 7 mm diffuser below it, so the rings read as fine lines against the ceiling rather than heavy hoops.
• Light colour is a choice: Pick cool white or warm white with no remote, or the dimmable brightness version if you want to vary the level - the spec follows whichever option you select.
• Wired to the ceiling: This is a hardwired fitting with an IP20 rating, intended for dry indoor rooms.

Specification

• Bulb fitting: Integrated LED
• Protection rating: IP20
• Mounting: ceiling rose with adjustable suspension cables
• Finish: brushed black, gold or coffee, depending on the option chosen
• Material: metal with acrylic diffusers

Dimensions

• Diameter: 80 cm (31.5")

Hang it centrally over a living room coffee table or a dining table, where the staggered rings have room to be seen from below and from the side. In a room with a generous ceiling height, the four- and five-ring versions fill a double-height space particularly well.